61L4aoIqYOL._AC_UL160_SR160,160_ Jak vyřešit nefunkční kameru na 3D tiskárně TwoTrees SK1 - KLIPPER WEBCAM

Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 8.66x8.66x9.84 inch

$169.00 (as of November 20, 2024 17:41 GMT +00:00 - )

The article titled “Jak vyřešit nefunkční kameru na 3D tiskárně TwoTrees SK1 – KLIPPER WEBCAM” provides instructions and minor improvements for operating a non-functional camera on the TwoTrees SK1 3D printer. The video, created by bradmantom, offers a comprehensive guide on resolving camera issues and showcases various upgrades made to the printer. The author, TOM, introduces himself and explains the motivation behind the video, highlighting the problems he encountered with the camera and sharing his solutions. Furthermore, the article discusses the configuration process and provides step-by-step instructions for connecting the camera, modifying settings, and ensuring proper functionality. Overall, the article aims to assist users in troubleshooting camera problems and utilizing the camera effectively on the TwoTrees SK1 3D printer.

In the video, TOM, the author and presenter, introduces himself and greets the audience, expressing his intention to showcase the upgrades and functionality of the TwoTrees SK1 3D printer. TOM discusses the modifications he made to improve the printer’s performance and demonstrates how to enable and configure a webcam or USB camera on the printer. He provides detailed instructions, including information on firmware versions, IP addresses, and necessary software programs for both Windows and MacOS users. Additionally, TOM offers tips and suggestions for positioning and securing the camera, ensuring optimal visibility of the print bed. Through his video, TOM aims to assist viewers in resolving camera issues and maximizing the capabilities of the TwoTrees SK1 3D printer.

Table of Contents

Introduction

In this article, we will discuss the upgrades that can be made to the TwoTrees SK1 3D printer, specifically focusing on improving the filament guide tube and modifying the filament holder. We will also provide instructions on setting up and configuring a webcam on the printer, including connecting the webcam to the USB port, verifying the firmware version, obtaining the IP address, and editing the webcam.txt file. Finally, we will discuss mounting and adjusting the webcam, including positioning it and attaching it using a hot glue gun. These upgrades and setup instructions will help improve the functionality and usability of the TwoTrees SK1 3D printer.

Upgrades on the TwoTrees SK1 3D printer

Improving the filament guide tube

The filament guide tube on the TwoTrees SK1 3D printer can be improved to ensure smooth and consistent filament feeding. Initially, the filament guide tube may be bent sharply, causing the filament to get stuck or clog during printing. To improve this, the guide tube can be replaced with a higher quality tube that has a larger radius and smoother bends. This can be easily achieved by removing the old guide tube and inserting the new one, ensuring that the filament can pass through without any obstructions. By improving the filament guide tube, the printer will have better filament feeding and reduce the chances of filament-related issues during printing.

Modifying the filament holder

The filament holder on the TwoTrees SK1 3D printer can be modified to accommodate larger spools of filament. The original filament holder may not be able to hold larger spools securely, causing the filament to unravel and tangle. To overcome this, a modified filament holder can be 3D printed to provide a larger and more stable platform for the spool. By using a larger filament holder, users can easily use different sizes of filament spools without worrying about them falling off or causing printing issues.

Setting up the webcam on the printer

Connecting the webcam to the USB port

To set up a webcam on the TwoTrees SK1 3D printer, the first step is to connect the webcam to the printer’s USB port. This can be done by plugging the webcam into the available USB port on the printer. Ensure that the webcam is securely connected and positioned in a way that provides a clear view of the printing area.

Verifying the firmware version

Before configuring the webcam, it is important to verify the firmware version on the printer. This can be done by checking the settings or configuration menu on the printer’s interface. The firmware version should be compatible with webcam functionality and support features like timelapse recording. Upgrading the firmware, if necessary, can be done by following the manufacturer’s instructions and using the appropriate firmware file.

Obtaining the IP address

To configure the webcam, the IP address of the printer needs to be obtained. This can be done by accessing the network settings on the printer’s interface. Locate the section that displays the IP address assigned to the printer. Take note of this IP address as it will be needed in the subsequent steps.

Configuring the webcam

To configure the webcam, a configuration file called webcam.txt needs to be edited. This file contains the necessary settings for the webcam to function properly on the printer. Open the webcam.txt file using a text editor and make the necessary changes to specify the device, resolution, and framerate. Ensure that the correct device number is specified, which is typically “0” for USB webcams. Adjust the resolution and framerate according to your preferences or the capabilities of your webcam. Save the changes made to the webcam.txt file.

Editing the webcam.txt file

Once the webcam.txt file has been edited and saved, it needs to be transferred to the printer. This can be done by connecting to the printer via SSH using a command prompt or terminal program. Enter the command “ssh Mks@“, replacing with the IP address obtained earlier. Enter the password when prompted. After successfully connecting to the printer, enter the command “sudo systemctl enable webcamd” followed by the password. This will enable the webcam service on the printer. Next, enter the command “sudo systemctl start webcamd” to start the webcam service. Finally, disconnect from the printer and proceed to the next section to mount and adjust the webcam.

Find 3D Printing Accessories Here

Mounting and adjusting the webcam

Positioning the webcam

When mounting the webcam on the TwoTrees SK1 3D printer, it is important to consider its positioning for optimal performance. The webcam should be positioned in a way that provides a clear view of the printing area without obstructing any moving parts or interfering with the printing process. Adjust the angle and height of the webcam to capture the desired view.

Attaching the webcam using a hot glue gun

To securely attach the webcam to the printer, a hot glue gun can be used. Apply a small amount of hot glue to the back of the webcam and press it firmly against the desired mounting location on the printer. Ensure that the webcam is aligned properly and held securely in place by the hot glue. Allow the hot glue to dry and set before using the webcam.

Conclusion

In conclusion, by making upgrades to the filament guide tube and modifying the filament holder on the TwoTrees SK1 3D printer, users can improve the overall printing experience and reduce potential printing issues. Additionally, setting up and configuring a webcam on the printer allows users to monitor the printing process remotely and capture timelapse videos. By following the instructions provided in this article, users can easily implement these upgrades and setup instructions to enhance the functionality and performance of the TwoTrees SK1 3D printer.

Maintain Your 3D Printer with these Tools