Printables

Grendizer V2 Parts are divided Even if you don't have a manual, you can assemble it if you print it out and assemble it in order The total height is 350mm Don't ask me to combine the parts that are divided It's impossible because we split the original

~ Fiberlogy collaboration series ~ We are introducing to you a whole new collection of vases available for free! This is the effect of a great collaboration with Fiberlogy. They invited us to test their new filament series and share the results with you! So here comes the first out of 4 new vase designs! This design is inspired by bio-structures, like the arrangement of cells and other organic components. Used Filament: This model was printed using HS PLA Clear Orange from Fiberlogy. The HS PLA Clear is designed in such a way that it can easily print with very high speeds, reaching up to 900mm/s, cutting the print time in half in most cases! In our test print the filament printed very quickly and nicely through the whole model without much issue. The end result (as seen above) is spectacular! The vibrant colour, the clear details and the amazing shine combined with the level of translucency of this material is a miracle of its own. We really recommend testing this one out on your own and see the amazing results! Tip - keep in mind that, as other translucent PLAs, the filament tends to be quite brittle, so we recommend unloading and storing the filament safely when it is not in use.

PLEASE READ: This is a 3D printable file, not a physical product. This is a file for a lifesized prop. depending on the size of your print bed, you may need to split the model down in your slicer software. I have sized the model to fit within a 256mm X 256 mm bed. the finished and assembled model stands a little more than 10.5 inches tall and 9 1/4 inches wide. The model has been designed for printing in mind. little to no supports are needed. All parts were tested on a printer. The quality of your print depends on your preferred slicer software, printer, and settings. I can not guarantee the quality of your finished print. Furthermore, as there are multiple different slicers available, i can not guarantee you wont run into your own unique software challenges. This print is to be used by the purchaser only and is not to be sold or distributed without proper permissions. You may use the material for non-commercial and personal purposes (No commercial purposes) You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. If you remix, transform, or build upon the material, you may not distribute the modified material. This is to be considered fan art.

This model features a Level 2 Sierpiński Octahedron fractal structure made from Rhombic Dodecahedra, designed with strategically placed gaps for seamless vase mode printing. The base is integrated into the fractal itself, forming a cohesive structure. I hope you enjoy printing it as much as I enjoyed designing and testing it! 😊 I've included 3MF files for two different size options, which you can see in the photos above. Have fun! 🥳 Access weekly exclusive designs, gain commercial rights to sell 3D prints of my creations, and enjoy other bonuses on Patreon! ♾️ https://www.patreon.com/c/endlessdesignlab License Information: This model is licensed under Creative Commons Attribution-NonCommercial-NoDerivatives (CC BY-NC-ND). You may share, copy, and redistribute this file for non-commercial purposes with proper attribution. However, you may not modify or create derivative works from this model. Selling this model, either digitally or as physical prints, is strictly prohibited. *Selling physical prints of my designs is only permitted if you are an active member of my Authorized Seller tier on Patreon, Printables, or Makerworld.* Thank you for supporting Endless Design Lab! Stay tuned for more mind-bending designs coming soon. For questions or business inquiries, reach out at [email protected] Visit Endless Design Lab's YouTube Page for updates and new creations: https://www.youtube.com/@EndlessDesignLab 🌌

I designed this to be a easy to print, flexible sword for my kids. works great, but you have to print the blade At a 45 degree angle on the build plate of your printer. And so you want a fairly large built plate for this. I recently got the Creality K2 plus with a 350mm build volume. And so that's what this was designed for But I have added shorter blades at sizes for the Prussia's MK3 series and. the bamboo labs 256. et cetera If you want a different length of blade, just message in the comments, and I will try and upload the size requested. Also, I found when printing the blade in tpu using a 0.6mm nozzle seemed to work better. But that would depend on your print settings. I just wanted it to be nice and durable and flexible The only part that can use support would be the handguard. Everything else can be printed without supports. If you want to make and sell these. For commercial licensing, email: [email protected]

Bring a touch of surrealism into your home or workplace with this unique desk lamp, inspired by the distinctive metaphysical art of Giorgio de Chirico. This lamp features a sculpture of a figure reminiscent of de Chirico’s iconic style, with the head serving as the lightbulb itself. It’s an imaginative fusion of art and functionality, perfect for adding an artistic and mysterious atmosphere to any room. Product Features: Artistic Design: The figure is modeled after de Chirico's surreal, classical figures, with the head serving as the light source. E14 Socket Compatibility: This lamp works with small base (E14) lightbulbs, ideal for creating the perfect ambiance. Unique and Functional: A blend of sculpture and illumination, bringing art into your everyday life. Hole Size: The hole for the lightbulb has a diameter of 2.5mm, making it compatible with most E14 bulbs. Perfect for: Home offices, study rooms, or as a conversation piece in any creative space. Add a creative twist to your desk with this one-of-a-kind lamp inspired by the works of de Chirico. Ideal for lovers of surrealism and unique, statement decor.

Jeu de société stratégie - points et boîtes - Jeu de société imprimable Découvrez une version physique et interactive du célèbre jeu stratégique Dots and Boxes ! 🟦🟥 Description du modèle : - Un plateau de jeu facile de 10x10 points - Des barres à insérer pour former les côtés des boîtes. - Des carrés pour marquer les boîtes conquises - Des rangements - Règles simples et stratégiques Pourquoi choisir cette version physique ? : - Une expérience interactive qui fait revivre ce jeu traditionnel de manière originale - Parfait pour les soirées jeux, les voyages ou simplement pour jouer à la maison - Une alternative durable et conviviale au numérique Informations techniques : - Formats de fichiers : STL optimisés pour impression 3D - Plateau de jeu simple et adapté - Aucune pièce complexe à imprimer, compatible avec la majorité des imprimantes 3D Téléchargez, imprimez et redécouvrez le plaisir des jeux classiques avec cette édition 3D de Dots and Boxes ! ⚠️ Ce modèle est destiné uniquement à un usage personnel. Toute utilisation commerciale, reproduction ou distribution à des fins lucratives est strictement interdite. Merci de me donner vos avis après impression pour savoir ce que je peux modifier et pourquoi pas un make ❤

ArtStation - Brush Drip Stand 🖌️💦 Der perfekte 3D-gedruckte Pinselständer für Hobbyisten & Profis! Unsere neue ArtStation-Serie bringt durchdachte 3D-Designs für Künstler, Miniaturen-Maler und 3D-Druck-Enthusiasten. Der Brush Drip Stand ist das erste Design dieser Reihe – mit weiteren spannenden Erweiterungen in Planung. Bald wird es auch ein praktisches Bundle mit allen Designs geben! ✅ Einfache & supportfreie Druckbarkeit ✅ Stabiler, werkzeugloser Zusammenbau dank der bewährten SnakeBite Connectors (bekannt aus dem Master Painter - Paint Rack) ✅ Optimale Trocknung von Pinseln nach der Reinigung ✅ Abnehmbarer Auffangbehälter für eine mühelose Reinigung ✅ Kompatibel mit Pinseln verschiedener Hersteller, darunter Vallejo, Citadel, Nico Pro, Lieberge, AK Interactive und viele mehr ✅ Für Pinsel mit einem Stieldurchmesser bis zu 10,5 mm 📌 Druckeinstellungen für unsere Testdrucke: Schichthöhe: 0,16 mm Erste Schicht: 0,2 mm Wände: 2 Obere Schichten: 4 Untere Schichten: 4 Infill: 20% 🎥 How-to-Videos folgen bald auf YouTube – aber der Zusammenbau ist auch ohne Anleitung kinderleicht! Entwickelt von 3D Otaku – für kreative Köpfe, die Qualität schätzen! 🎨✨

A Cute Bunny (Single or Multicolor) (Maybe he ate a little too much)

Organize your keys in style! 🏔️🔑 This mountain-shaped key holder is the perfect blend of functionality and design. Not only will it keep your keys in place, but it will also add a unique touch to your home. Whether you’re a nature lover or an adventure enthusiast, it will bring a unique touch to your home. iIt can be screwed into the wall or securely attached with double-sided tape, making it easy to install in any space. Perfect for nature lovers and adventurers. Make your entryway stand out! **Español** ¡Organiza tus llaves con estilo! 🏔️🔑 Este llavero con forma de montaña es la combinación perfecta de funcionalidad y diseño. No sólo mantendrá tus llaves en su lugar, sino que también agregará un toque único a tu hogar. Tanto si eres amante de la naturaleza como si eres un apasionado de la aventura, aportará un toque único a tu hogar. Se puede atornillar a la pared o fijar de forma segura con cinta adhesiva de doble cara, lo que facilita su instalación en cualquier espacio. Perfecto para amantes de la naturaleza y aventureros. ¡Haz que tu entrada destaque!

build video : https://youtu.be/yl6BmV3oRZ0 stl and instruction inside rar file Inspired by the Mega Man Legends series and blended with elements from Mega Man Battle Network and Mega Man X, this model design brings a unique fusion of styles. The joints use flexible and durable TPU material, making them resistant to loosening while staying smooth and easy to move. With a wide range of articulation, this model can easily perform dynamic and expressive poses Any feedback is appreciated, contact me if you have any Critic, Suggestions, or Issues regarding this model at: [email protected]

Introducing the **Ultimate Game Controller Fidget!** Tired of boring fidget toys? Level up your fidget game with our **Game Controller Fidget** —the ultimate stress-reliever for gamers, multitaskers, and anyone who loves to keep their hands busy! This isn’t just any fidget toy—it’s a full-on **tactile playground**! With **buttons to click, joysticks to wiggle, a trackball to spin, finger rollers to glide, knobs to twist, and ergonomic grips to squeeze**, this toy is packed with endless ways to fidget. **Take control of your fidgeting —because life doesn’t have a pause button!** **See all the features on this video** https://youtube.com/shorts/YV6dSzGVxeQ?si=SZywngLtIMiQhGD6 **WARNING** 3D-printed fidgets with moving parts may come loose over time, creating a potential choking hazard for small children. Please use with care and keep out of reach of young kids. **SOCIAL MEDIA LINKS** if you have nothing else to do: TikTok https://www.tiktok.com/@fidgekits YouTube https://youtube.com/@fidgekits3d

Bulbasaur 3D Pokémon Pokemon Figure 3MF Files and Split STL's can be found on MakersWorld: https://makerworld.com/en/@ABC3D_Models Make sure to visit our Patreon for the most recent designs! https://www.patreon.com/ABC3D_Models Model is designed for resin printing. Prohibition: selling/exchanging digital files or 3D prints. Leave print reviews, so other people can make a buying decision. Thank you for your support!

Pikachu 3D Pokémon Pokemon Figure 3MF Files and Split STL's can be found on MakersWorld: https://makerworld.com/en/@ABC3D_Models Make sure to visit our Patreon for the most recent designs! https://www.patreon.com/ABC3D_Models Model is designed for resin printing. Prohibition: selling/exchanging digital files or 3D prints. Leave print reviews, so other people can make a buying decision. Thank you for your support!

**FantastiCraft3D Presents** the **Valentine fairy bear** A cute little Valentine fairy bear. Includes a painted .3MF file. Happy printing! Please check out my other models, The Skeleton Knight, Tri-clops Alien, the Dragon, The Viking dog and more! This download includes a zip file with 4 files containing, a readme, the STL, the 3MF and a painted 3MF for those of you who have color printers such as the Bambu Lab line. --- 🚀 Want early access, **exclusive models**, and special bonuses? Join my Patreon and get new releases before they hit Cults3D! Some models are **Patreon-only** so don’t miss out! 👉 Join here:[FantastiCraft3D Patreon](https://www.patreon.com/c/FantastiCraft3D/) If you enjoy this model, please leave a positive review—it really helps me to continue making my art. 🙌 Thanks for your support, and happy printing! 🎨🖨️ John FantastiCraft3D --- All FantastiCraft3D/John Cleary designs are copyrighted and protected by law. Purchasing this model grants personal use for you only—no selling, altering, or sharing of digital files or printed models are permitted. Please help Support 3D artists by respecting these rights and never sell or share our digital files. if you are interested in obtaining the commercial rights to sell physically Printed models of my designs then please visit my patreon and join right here. [FantastiCraft3D Patreon](https://www.patreon.com/c/FantastiCraft3D/) My digital files are never to be sold, shared, altered or distributed in any way. Thank you. --- Please visit my socials to see more of my Fantasy/Sci Fi themed character models for FDM printing. [Instagram](https://www.instagram.com/fantasticraft3d/) [Patreon](https://www.patreon.com/c/FantastiCraft3D/) [Facebook](https://www.facebook.com/FantastiCraft3D/) [Youtube shorts](https://www.youtube.com/@FantastiCraft3D) [LinkTree](https://linktr.ee/FantastiCraft3D) https://cults3d.com/@FantastiCraft3D

This is the second version of my foldable chessboard. If you want to see the first version, visit the following link: [link](https://cults3d.com/en/3d-model/game/foldable-chess-board) Like the first version, this is a foldable half-chessboard that stores half a set of chess pieces. The concept is simple but unique: you print one half of the chessboard and half of the chess pieces, while your friend prints the other half. Together, you can create a complete chess set to enjoy the game. I've called this collection "Chess for Sharing" because chess is always better when played together. Each half set consists of: 8 pawns 2 knights 2 bishops 2 rooks 1 queen 1 king 1 foldable chessboard without squares (two parts) 32 squares (16 of one color and 16 of the other) 1 locking piece (dual function: closes the board and connects the two halves when extended) When both halves are joined and the tiles are assembled, they form a complete chessboard measuring 40 x 40 cm, providing a comfortable playing size. Although the board does not match the official dimensions of a chessboard, it has been designed to fit within the constraints of a standard 3D printer bed (20 x 20 cm). With this project, you can share the fun of chess and 3D printing with a friend. Print, assemble, and start playing!

3D printed iPhone case designed to resemble a retro vintage monitor! This case offers a nostalgic nod to classic tech, blending modern convenience with retro aesthetics. Choose from four unique design options to suit your style and printing needs. Images for reference only and may not match phone model. Available Options: Rounded Corner with Faceplate – Minimal support required. Comes with a 3MF file featuring painted support for easy printing. Sharp Corner with Faceplate – Minimal support required. Includes a 3MF file with painted support for a smooth print experience. Rounded Corner Without Faceplate – No support required, ideal for those looking for a cleaner design. Sharp Corner Without Faceplate – No support required, for those who prefer a more angular look. Required Parts: 555-104_V4 Volume – 2 copies 555-105_V1 Volume Link – 2 copies 555-106_V1 Clip – 10 copies Other components: 1 copy each Note: Unauthorized sharing or distribution of these files is strictly prohibited under our licensing agreement. All rights are reserved, and we kindly ask that you respect the intellectual property associated with these designs Disclaimer: This product is a 3D-Printed phone case designed for aesthetic purposes. It is not intended to provide significant protection against drops, impacts, or other physical damage. Use with care.

Este diseño se puede trasformar de Robot a Camión El modelo esta creado para que cada pieza se imprima en su respectivo color para luego pegarse. No es necesario MMU o AMS Todas las piezas entran dentro de un formato similar al de la Ender 3 o Mk3s+ (220 x 220 x 250 mm). https://youtu.be/c1MmIn8YNvo

It is a compact brushless motor mini-jet. It is a powerful jet with a powerful airflow that can be used for multiple purposes and act as a portable leaf blower. Its special feature is to contract and expand its nozzle diameter by rotating the center grip. Do check it out, guys. If you don't have a 3D printer and would like a fully assembled model or a kit, send me a message and I'll be more than happy to discuss 🙂 Watch our brushless blower on YouTube https://youtu.be/1YOrQT6Fg2Y If you don't have a 3D printer and would like a fully assembled model or a kit, send me a message and I'll be more than happy to discuss 🙂 This product includes STL files, BOM & Printing Instructions Printer Requirements: 220x220x250mm or larger Recommended Material: PLA, ABS,TPU Printer Type: FDM Note - This work is licensed under a Standard Digital File License

Introducing a modular organizer designed for storing small parts like bolts, nuts, screws, electronics, and other components. Perfect for workshops, electronics, and DIY enthusiasts! Key Features: - Sliding drawers – open by pressing the top button. - Two drawer sizes – small and large versions included. - Dividers – optional separators for better organization. -Modular system – connect multiple units with clips to create a custom storage setup. -Optimized for 3D printing – prints easily without supports and assembles effortlessly. - The set also includes two templates (large and small) for cutting stickers for the boxes. Dimensions: - Small drawer: 60 × 34.5 × 21.5 mm - Large drawer: 60 × 79.5 × 21.5 mm I recommend placing this organizer flush against the wall to prevent it from sliding on the table when pressing the buttons. You can also secure it to the table using double-sided tape Video https://www.youtube.com/shorts/RXhBib027OM

Hello, I hope you like port operations. This package has everything you need to have your own model **remember to put supports only on: PILE TERMINAL ---> TRML 03 REACHSTACKER ---> REACH 01 Any questions or recommendations, please contact me on Instagram https://www.instagram.com/mortex.3d/

*Ring, Ring* It's for you 😜 Classic style phone with a creepy twist. Print in separate parts. Phone - Black Teeth - White Tongue - Pink/Red

Pacman's coming at you IRL and he's hungry Printed in multiple parts. Eyes - Black Tongue - Pink/Red Head - Yellow/Pink/Get Creative!

Knitted MICKEY MOUSE FAN ART A 3D Printable Articulated Knit Pattern Mickey Mouse Model is a uniquely designed collectible figurine that combines the charm of Disney’s iconic character with the aesthetics of a knitted texture. This model features a meticulously sculpted surface that mimics the interwoven loops of fabric, giving it the appearance of a handcrafted plush toy. **PRINT IN PLACE** **ARTICULATED**

Once again, it turned out to be a dragon. The dragon was modeled in 3 versions: fully four-color, four-color with the ability to glue 6 mm eyes, and one-color with the ability to glue 6 mm eyes. I made the dragon itself as mobile and pleasant to the touch as possible. Check out my other models: https://cults3d.com/en/users/Hom_3D_lab/creations